2*200G CFP2 Muxponder for 2U DCI BOX
Product Overview
HYD Technology has developed this 2*200G CFP muxponder, which offers a service access module based on 4*100G for the optical fiber link. It can realize the tunable wavelength of the CFP2 coherent optical module and hence can be converted into a standard DWDM wavelength for an optical signal.
It offers interconnection with the multiplexer and demultiplexer of DWDM and hence helps realize the multiplexed wavelength division in the transmission. It can provide a solution to solve issues with the transmission line.
- It offers wavelength conversion based on the DWDM transmission.
- The architecture is flexible with the 200G pluggable and digital coherent modules.
- It offers a single card that supports four channels, whereas the line side supports 2 channels of 100G and 200 G, respectively.
- Client services access based on multiple service access is supported.
- It can offer support for the FEC modes on the line side.
- It offers pluggable modules of standard MSA.
- 200G and 200 G long haul application ranges are up to 1000 Km and 400 Km, respectively.
- If any enquiry ,please contact HYD TECHNOLOGY .
System Parameter | Technical Index |
Maximum capacity | 2*200G bidirectional/unidirectional transmission |
Wavelength (frequency) range | DWDM: 1529.16nm-1567.14nm(191.3THz-196.05THz) |
CFP2 DCO 200G Optical Transmitter Specifications | |
Modulation | DP-QPSK@100G, DP-16QAM@200G, DP-QPSK@200G, PM-16QAM@200G, PM-16QAM@400G, PCS-16QAM@400G |
Transmitter output power range | +5~-10dBm |
Transmitter OSNR | 35dB/0.1nm(OSNR at transmitter output (in-band)) |
Channel spacing | 50GHz |
Optical return loss | 27dB |
Max. -3dB spectral width | 0.4nm |
Min. SMSR (side mode suppression ratio) | 45dB(Measured over +/-2.5nm range around the target frequency with 0.06nm RBW without modulation.) |
Laser line width | 100~300kHz(FWHM-full width at half maximum of power density spectrum of CW.) |
CFP2 DCO 200G Optical Receiver Specifications | |
Input power range | -18~+5dBm(Signal power of the selected channel) |
OSNR Sensitivity | 19.5dB/0.1nm(At internal FEC threshold (post FEC BER < 10-15), at optimum input power as specified above.) |
Receiver sensitivity | -21dBm(Minimum input power needed to achieve post FEC BER < 10-15 when OSNR > 35dB and internal FEC enabled.) |
CD tolerance | 40000ps/nm(With less than 0.5dB OSNR penalty at FEC threshold.) |
PDL tolerance | 3dB PDL tolerance under the following conditions: 1) PDL applied before noise loading; 2) Change in SOP is <=1 rad/millisecond; 3) With additional 1.5dB OSNR penalty. |
Input power transient tolerance | 5dB(Optical input power transient tolerance Less than 0.5dB OSNR penalty if the received power is within input power range and rise/fall times of power change (defined by 20-80%) of 50s or slower.) |
Channel spacing | 50GHz |
Optical return loss | 27dB |
| |
Service access types | OTU4/OTUC1/100GE/OTUC2/200GE |
Dimensions (mm) | 177(W)*40(H)*225(D) |
Working temperature | -10℃~70℃ |
Storage temperature | -40℃~80℃ |
Relative humidity | 5%~95% no condensation |
Safety and EMC | Compliance with FCC, UL, CE, TUV, CSA standards |
Power consumption | <78W |
Applications
This module launched by HYD Technology can offer the application in multiple aspects where optical networks are used, like data interconnection centers where the data has to be transmitted over a longer transmission wavelength and needs support for this process.
