RFA Amplifier
Product Overview
HYD Technology has developed this RFA amplifier card which supports the DWDM optical communication and can also be used with EDFA amplification. The card is based on the SRS effect and allows control of the influence of effectiveness, like mixing four waves. It also helps improve the signal-to-noise ratio and tends to increase the transmission distance.
If any enquiry ,please contact HYD TECHNOLOGY .
- This card offers C-band DWDM support when it comes to optical amplification and, at the same time, allows for low consumption of power followed by higher gain and low noise.
- It can support the maximum saturated output power of negative 5dB and minimum input power of -38dBm in association with functions for monitoring module temperature, pump output power, and pump drive current.
- It can support multiple network management platforms like a unified SNMP network platform, telnet and console, and graphical interface.
System Parameter | Technical Index |
Wavelength range | 1528nm~1565nm |
Input power range | Minimum: -38dBm |
Output power range | -28dBm~-5dBm |
Maximum gain | 10dB |
Noise index | 3dB |
Gain flatness | 3dB |
Output isolation | 40dB |
Input/output return loss | 55dB |
Output pump leakage | -30dBm |
Polarization dependent gain | 0.5dB |
Polarization mode dispersion | 0.5ps |
Dimensions (mm) | 177(W)*40(H)*225(D) |
Working temperature | -10℃~70℃ |
Storage temperature | -40℃~80℃ |
Relative humidity | 5%~95% no condensation |
Safety and EMC | Compliance with FCC, UL, CE, TUV, CSA standards |
Power consumption | <30W |
Application
This RF amplifier designed by HYD Technology is capable of generating sufficient high peak powers and helps amplify weak signals by reducing the detection noise until and unless the noise is too large. Supports broadcasting and wireless communication very efficiently by amplifying the weaker signals.
